the static pull-in instability of beam-type micro-electromechanical systems is theoretically investigated. two engineering cases including cantilever and double cantilever micro-beam are considered. considering the mid-plane stretching as the source of the nonlinearity in the beam behavior, a nonlinear size-dependent euler-bernoulli beam model is used based on a modified couple stress theory, c...

abstract: the main aim of the vibration energy harvesters is to locally power autonomous devices such as wireless sensors. generally, power levels are low and the environmental benefit of the technology is to replace batteries rather than saving energy per se. piezoelectric vibrational energy harvesters are usually inertial mass based devices, where a cantilever beam with a piezoelectric outer ...

In this paper, a plane quadrilateral element with rotational degrees of freedom is developed. Present formulation is based on a hybrid functional with independent boundary displacement and internal optimum strain field. All the optimality constraints, including being rotational invariant, omitting the parasitic shear error and satisfying Fliepa’s pure bending test, are considered. Moreover, the...

The static pull-in instability of beam-type micro-electromechanical systems is theoretically investigated. Two engineering cases including cantilever and double cantilever micro-beam are considered. Considering the mid-plane stretching as the source of the nonlinearity in the beam behavior, a nonlinear size-dependent Euler-Bernoulli beam model is used based on a modified couple stress theory, c...

Vibration energy harvesting with piezoelectric materials currently generate up to 300 microwatts per cm2, using it to be mooted as an appropriate method of energy harvesting for powering low-power electronics. One of the important problems in bimorph piezoelectric energy harvesting is the generation of the highest power with the lowest weight. In this paper the effect of the shape and geometry ...

The static pull-in instability of beam-type micro-electromechanical systems is theoretically investigated. Two engineering cases including cantilever and double cantilever micro-beam are considered. Considering the mid-plane stretching as the source of the nonlinearity in the beam behavior, a nonlinear size-dependent Euler-Bernoulli beam model is used based on a modified couple stress theory, c...

in this paper, chaotic motion analysis and its control for a non-planar non-linear cantilever beam with axial and lateral parametric excitation in the free end is accomplished. this is a new method for control of chaotic motion of a non-linear planar beam. in this survey, internal resonance of the beam is 2:1 and the initial resonance is in the outside of plane and it is assumed a sub-resonance...

The study of vibration response of a turbine blade helps to detect the crack presence in the blade which alters its dynamic characteristics. The change is characterized by changes in the modal parameters associated with natural frequencies. In this paper, study of vibration response is made for turbine blade in the presence of a crack like defect. Turbine blade is initially assumed as a cantile...

A semi-analytical method is used to illustrate the behavior of a multimodal nonlinear electromechanical system which is under base-excitation. System is considered as piezo-ceramic patches attached to a cantilever beam coupled to a resistive load. The cantilever beam is modeled as a nonlinear Timoshenko beam using Assumed Mode method and equations of motion are derived through Lagrange's equati...

"Large and small deflections of a cantilever beam".Large and small deflections of a cantilever beam". ABSTRACT The classical problem of deflection of a cantilever beam of linear elastic material, under the action of an external vertical concentrated load at the free end, is analyzed. We present the differential equation governing the behaviour of this physical system and show that this equation...